商品詳情
RSEAT A1-120 Formula 鋁擠 賽車架
可升級動態模擬 / 台灣代理公司貨
* 商品不含賽車椅、方向盤、踏板、排檔變速器、電視架等設備,需另購 *
車架安裝
方式 全方位可調,包括前後、傾斜、上下。三種配置:正面安裝支架、Fanatec®側面安裝支架和底部安裝 支架。
提供了用於連接軸距的所有工具和螺絲。
踏板支架
通用踏板支架,附腳跟支撐。還可以安裝任何高端踏板,帶有底部安裝支架的踏板。前後、上下、傾斜等全方位可調。
提供了用於安裝踏板的所有工具和螺絲。厚壁 6063-T6 鋁 80×40 擠壓型材與 CNC 加工的厚側安裝支架相結合,保證了堅如磐石的性能。
核心特性
RSEAT A1-120 Formula 底盤採用厚壁 40 x 120 T 型槽鋁擠型型材。不做任何妥協。材質為鋁 6063-T6 6000 系列鋁。
它具有出色的表面光潔度和極限拉伸強度,用於極限運動裝備。金屬板由雷射切割碳鋼製成 - 10 毫米厚。
底盤採用 TIGER Drylac®(歐盟製造)粉末塗層霧面精細結構飾面。所有原料均在歐盟製造。
排檔 / 手煞車 支架【需另外購買】
堅如磐石的全方位可調變速把手和手煞車升級套件。變速套件的可調性包括高度和前後位置。
手煞車套件需要變速套件!手煞車可全方位調節,包括前後位置和基於座椅位置的角度,座椅與手煞車之間的平行至 30°。
鍵盤/滑鼠 支架 【需另外購買】
人體工學的鍵盤和滑鼠托盤解決方案。內建滑塊、旋轉鉸鏈。安裝在駕駛艙的左側或右側。
鍵盤托盤可以在使用設備時旋轉,以實現人體工學和打字。
按鈕盒/PC 支架【需另外購買】
按鈕盒托盤配有旋轉鉸鍊和全方位可調安裝支架。可調性包括傾斜、旋轉以及左右、前後、上下位置。
PC 托盤是狹小空間和人體工學的最佳解決方案。上下可調。適合 PC 機殼尺寸 ATX 至 EATX,重量為 30 公斤(66 磅)。
電視/螢幕支架【需另外購買】
在底盤上,整合電視/顯示器支架。 SX55單螢幕和TX32三螢幕。 SX55 支架支援任何高達 59 吋超寬的顯示器。
包括 VESA、75×75、100×100 至 400×800。 TX32支架支援三螢幕設置,從3×24英吋到3×32英吋以及VESA 100×100、100×200到200×200。
支架可上下、前後調整。與最強大的軸距一起使用時堅如磐石,無彎曲。
✅ 商品特色:
- 超耐用且穩定的結構。
- 40mm x 120mm 6063 T-6 擠壓6000 系列鋁
- 3.5 毫米型材壁厚
- 支援任何帶有稱重感測器或液壓的直接驅動輪和專業踏板
- 35+ nm 最大車輪扭矩
- 安裝機殼左側或右側的任何配件,包括變速桿、鍵盤和滑鼠托盤、平板電腦按鈕盒安裝座
- 座位位置 Rally/GT/Formula(帶套件升級)
- 模組化框架(可透過配件升級)
- 包括座椅滑塊。
- 佔地面積尺寸:長 x 寬 1425 x 760 毫米
- 提供用於安裝車輪和踏板的所有工具和螺絲
- 所有 RSeat 製造組件均享有5 年保固。
- 重量:62公斤
- 建議使用者身高:120 公分 - 220 公分+
- 塗裝:TIGER Drylac®(歐盟製造)粉體塗層霧面精細結構飾面
- 100% 歐盟製造:在歐洲設計、設計和製造。
✅ 商品支援:
下鎖式方向盤:Bottom Mount Wheelbase Support
- MOZA R5, R9, R16, R21
- Asetek Forte 18 nm Direct Drive, Invicta 27 nm Direct Drive
- Fanatec CSL, CSL-Elite, CSL-DD/Pro/GT, DD1, DD2
- Fanatec Clubsport wheel V1/2/2.5
- AccuForce V1, V2
- Logitech G25, G27, G29, G920/G923
- Thrustmaster All wheels
前鎖式方向盤:Front Mount Wheelbase Support
- SimuCube 2 Sport, Pro, Ultimate
- Bodnar 50 series
- Simagic Alpha Mini DD, Ultimate
- MiGe 130ST (small, big)
- Lenze MCS12 series
- VRS DirectForce Pro
踏板:Advanced Pedal tray with heel support
- MOZA CRP, SRP Lite, SR-P Pedals
- Asetek Forte S Series 2 Pedals, Asetek Forte® Sim Racing 2 Pedals
- Asetek Invicta Clutch System, Asetek Invicta S Series 2 pedals
- Asetek Invicta Sim Racing Pedals
- Simucube ActivePedal
- Heusinkveld Sim Pedals Pro, Sprint, Ultimate
- Meca Cup Pedals
- Simagic P2000 Pedals
- Augury Pedals 121
- Simworx Pro GT pedals
- VRS DirectForce Pro Throttle, Brake, Clutch Pedals
- Asetek SimSports Forte™, Invicta™ pedals
- BJ STEEL GT/F1 HYDRAULIC Pro Pedals
- Thrustmaster T-LCM, T3PA, all other models
- Fanatec ClubSport Pedals V1/V2/V3, V3 inverted
- Fanatec CSL Elite Pedals
- Logitech (all models)
座椅:A1 Side Mounting Brackets
- Fit Any Sparco, Recaro, Bride etc.
- Side distance between seat mounting points Min/Max – 285 – 295 mm (11.2 – 11.6 inch)
- Seat Width – Min/Max (at mounting points) – 390 – 520mm (15.3 – 20.5 inch)
- Mounting Points – M8
- Angle adjustment – Tilt 0 – 18°
按鍵盒:A1 Bottom Mounting Brackets
- Sparco Bottom mount support 271 x 345 mm
- Recaro Bottom mount Support 297 x 406 mm, 261 x 406
- Bride, Corbeau, Cobra Bottom mount support 290 x 330 mm
- Mounting Points – M8
- Angle adjustment – Tilt 0 – 6°
排檔/配件:A1 Shifter Mount Kit
- Chassis Mounting Location – Left / Right side
- Shifter mount position adjustment – up / down, left / right, tilt, slide front / back on A1 chassis.
- Fanatec ClubSport Shifter (all versions)
- Pro Sim Quaife shifter
- Heusinkveld Sim Shifter Sequential
- Simworx pro series Supercar Sequential Shifter
鍵盤支架:A1 Keyboard Tray Kit
- Chassis Mounting Location – Left / Right side
- Tray dimensions – 500 x 200 mm (19.7 x 7.9 inch)
- Keyboard tray position adjustment – All way adjustable, up down, swivel, slide left-right with slider.
- Mounting to chassis – rseat A1 hinge 80×40
- Slider linear travel – 390 mm (15.3 inch)
- Slider fixation – Knob
滑鼠支架:A1 Mouse Tray Kit
- Chassis Mounting Location – Left / Right side / On shifter mount
- Tray dimensions – 240 x 200 mm (9.5 x 7.9 inch)
- Mouse tray position adjustment – All way adjustable, up down, swivel, slide Left-Right / Front-Back with slider.
- Mounting to chassis – rseat A1 hinge 80×40
- Slider linear travel – 140 mm (5.5 inch)
- Slider fixation – Knob
電腦主機支架:A1 PC Tray Mount Kit
- Chassis Mounting Location – Wheelbase uprights
- Tray dimensions – 582 x 270 mm (22.9 x 10.6 inch)
- PC tray position adjustment – Height adjustable.
- Supported PC case – ATX / EATX
- MAX PC weight – up to 20kg (44 lbs)
【單】電視/螢幕支架:A1 SX55 Single TV/Monitor
Stand Single screen on chassis TV/Monitor Stand for up to 55 inch TV/Monitor
- VESA Mount 100 x 100 – support sizes 75×75 and 100×100
- VESA Mount 200 x 200 – support sizes 100 × 100, 100 × 200 and 200 × 200
- VESA Mount 400 x 800 – support sizes 200 × 200, 200 × 300, 300 × 300, 200 × 400, 400 × 400 up to 400 × 800
【三】電視/螢幕支架:
A1 TX32 Triple TV/Monitor
Stand Triple screen on chassis TV/Monitor Stand for up to 3 x 32inch
- VESA Mount 100 x 100 – support sizes 75×75 and 100×100
- VESA Mount 200 x 200 – support sizes 100 × 100, 100 × 200 and 200 × 200
TX43 Triple TV/Monitor
Stand Triple screen standalone TV/Monitor Stand for up to 3 x 42 inch
- VESA Mount 100 x 100 – support sizes 75×75 and 100×100
- VESA Mount 200 x 200 – support sizes 100 × 100, 100 × 200 and 200 × 200
SX90V2 Single TV/Monitor
Stand Single screen standalone TV/Monitor Stand for up to 90 inch TV's
- VESA Mount 100 x 100 – support sizes 75×75 and 100×100
- VESA Mount 200 x 200 – support sizes 100 × 100, 100 × 200 and 200 × 200
- VESA Mount 400 x 800 – support sizes 200 × 200, 200 × 300, 300 × 300, 200 × 400, 400 × 400 up to 400 × 800